Part One: Chemicals and Corporate Identity
Chemical Chinese name: Nitrous oxide (compressed): laughing gas
Chemical English name: nitrous oxide; Laughing gas
Manufacturer Name: Foshan Nanhai Nengcheng Industrial Gas Co., Ltd.
Address: South of Hongling East Road, Phase II Development Zone, Changhongling Industrial Park, Shishan, Nanhai District, Foshan City
Email address: 576902317@qq.com
Part 2 Composition/Composition Information
√Pure product mixture
Hazardous substance concentration GAS
Nitrous oxide (compressed) ≥99% 10028-97-2
Part Three Overview of Risks
Hazard category: Class 2.2 non-flammable gas
Invasion path: inhalation, ingestion, transdermal absorption
Health hazard: It has been used in medicine for a long time as an inhalation anesthetic, but it has been rarely used now. Inhale this product and empty
A mixture of gas, when the oxygen concentration is very low, it can cause suffocation; inhalation of 80% of this product and oxygen report
The mixture causes deep anesthesia, and generally has no sequelae after recovery.
Environmental hazards: it is harmful to the environment and can cause pollution to water bodies, soil and atmosphere
Burning and explosion hazard: This product supports combustion and is narcotic.
Part IV First Aid Measures
skin contact:
eye contact:
Inhalation: quickly leave the scene to a place with fresh air. Keep the airway open. If breathing is difficult, give oxygen
gas. If breathing stops, give artificial respiration immediately. Seek medical attention.
Ingestion:
Part Five Fire Prevention Measures
Hazardous characteristics: It can assist combustion when it meets with flammable gas such as ether and ethylene, which can intensify the flame burning. Hazardous combustion products: nitrogen oxides
Fire fighting method: This product is non-flammable. Firefighters must wear gas masks and full-body firefighting suits to put out the fire in the upwind direction.
Use water mist to keep the containers in the fire area cool. Cut off the power supply quickly, and cut off the gas with water spray protection
The personnel of the source, then select the appropriate extinguishing agent to extinguish the fire according to the cause of the fire.
Part VI Emergency Response to Leakage
Emergency action: Quickly evacuate personnel from the leaked contaminated area to the upper wind, and isolate them, strictly restrict access. build
It is recommended that emergency response personnel wear self-contained positive pressure breathing apparatus and general work clothes. Cut as much as possible
Source off. Reasonable ventilation to accelerate diffusion. Leaking containers should be properly handled, repaired and inspected before
use.
Part VII Handling and storage
Handling precautions: closed operation. Airtight operation provides good natural ventilation conditions. operator
Must undergo special training and strictly abide by the operating procedures. Keep away from fire, heat, and workplace
Smoking is strictly prohibited. Keep away from flammable and combustible materials to prevent gas from leaking into the workplace air. avoid
Contact with reducing agent. Lightly load and unload during transportation to prevent damage to cylinders and accessories. Equipped with corresponding products
Types and quantities of fire-fighting equipment and leakage emergency treatment equipment.
Precautions for storage: Store in a cool, ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 30℃.
It should be stored separately from easily (combustible) materials and should not be mixed. The storage area should be equipped with leakage emergency treatment equipment
Prepared.
Part VIII Exposure Control/Personal Protection
Maximum allowable concentration: China MAC (mg/m3): 5[NO2] Former Soviet Union MAC (mg/m3): no standards have been established Monitoring method: Naphthalene ethylenediamine hydrochloride colorimetric method
Engineering control: closed operation. Provide good natural ventilation conditions.
Respiratory system protection: Generally, no special protection is required. Self-contained filter gas masks (half
Face mask).
Eye protection: Generally, no special protection is required.
Body protection: wear general work clothes.
Hand protection: Wear protective gloves for general work.
Other protection: Avoid high concentration inhalation. When entering the tank, restricted space or other high-concentration areas, someone must be supervised.
Part 9 Physical and Chemical Properties
Appearance and properties: colorless, odorless gas, sweet taste.
PH value: Melting point (℃): -90.8
Relative density (water=1): 1.23 Boiling point (℃): -88.5
Relative density (air=1): 1.52 Saturated vapor pressure (KPa): 506.62 (-58℃) Heat of combustion (Kj/mol): meaningless Critical temperature (℃): 36.5
Critical pressure (Mpa): 7.26 Octanol/water partition coefficient: No data Flash point (℃): meaningless Ignition temperature (℃): meaningless
Lower explosion limit [%(V/V)]: meaningless upper explosion limit [%(V/V)]: meaningless Minimum ignition energy (Mj): meaningless Maximum explosion pressure (MPa): meaningless Solubility: soluble in water , Ethanol, ether, concentrated sulfuric acid.
Main purpose: used as a medical anesthetic, antiseptic, and for air tightness inspection.
Part 10 Stability and Reactivity
Stability: stable
Polymerization hazard: no polymerization
Conditions to avoid:
Incompatible materials: strong reducing agents, flammable or combustible materials.
Decomposition products:
Part 11 Toxicological Information
Acute toxicity: LD50: no data
LC50: 1068mg/m3, 4 hours (rat inhalation)
Irritating:
Sensitization:
Teratogenicity:
Part XII Ecological Information
Ecotoxicity:
Biodegradability:
Non-biodegradability:
Other harmful effects: The substance is harmful to the environment, and special attention should be paid to surface water, soil, atmosphere and drinking
Water pollution.
Part 13 Disposal
Discarded characteristics:
Disposal methods: Refer to relevant national and local regulations before disposal. The exhaust gas is directly discharged into the atmosphere. Disposal notes:
Part 14 Transportation Information
Dangerous Goods Number: 22017
UN Number: 1070
Packaging mark: non-combustible gas
Packing category: Type III packing
Packing method: steel gas cylinder; ordinary wooden box outside the ampoule.
Transportation precautions: When using steel cylinders, you must wear the safety helmet on the cylinder. Cylinders are generally laid flat and should
Place the bottle mouth in the same direction and do not cross; the height must not exceed the vehicle's protective fence,
And use a triangular wooden pad to fasten it to prevent rolling. It is strictly forbidden to mix with flammable or combustible materials
Luck. In summer, it should be transported in the morning and evening to prevent sun exposure. It is forbidden to drop off during railway transportation.
Part 15 Regulatory Information
Regulatory information: Regulations on the Safety Management of Hazardous Chemicals (promulgated by the State Council on January 26, 2002), workplace
The Regulations on the Safe Use of Chemicals ([1996] Labor Department Issue No. 423) and other regulations have made corresponding regulations on the safe use, production, storage, transportation, loading and unloading of chemical dangerous goods; the classification and marking of commonly used hazardous chemicals ( GB 13690-92) classifies this substance as Class 2.2 non-combustible gas.